Email Us : bioproducts@bigpond.com

Brochure of BIO PRODUCTS Australia PTY LTD

Bio Antique WAX

BIO ANTIQUE WAX & HARD FLOOR WAX

DESCRIPTION The combination of different natural waxes and oils makes it a very unique product for sealing surfaces It is made from renewable materials like plant oils and waxes, which are well known to the trade. Natural and non toxic ingredients makes it also gentle to the climate and resources It is a transparent, matt-finished sealing waxes without synthetic additives BIO waxes seal the pores and form a durable, anti-static surface that repels water and dirt. For use on all types of wood surfaces as an alternative to lacquer or varnish, especially on new and antique furniture, toys, shelves etc. BIO Hard Floor Wax may be used on all types of timber floor surfaces, stone, tile or slate. Not recommended for use where moisture or condensation occur

PREPARATION Do not apply coatings to unseasoned or wet timber. Wood should be well sanded, dry and cleaned of greasy, waxy and dirty contaminants using BIO Thinner. Hardwoods and timbers rich in natural oils, waxes, acids and terpenes should be degreased using Bio Thinner, because these substances may mix with the varnish and prolong its drying time. Imperfect coats may require complete stripping before applying BIO Products.

APPLICATION BIO Antique Wax and BIO Hard Floor Wax are ready-to-use. It might be helpful especially during cold weather to soften the wax by standing the container in a 60 +C water-bath. Apply thinly and evenly with a lint free cloth or brush, working the wax well into the grain. Thick coats may cause white streaks. Let dry and start polishing when the wax is still wet. Do not leave until completely dry as buffing is then very difficult. On stone, tile or slate thin BIO Hard Floor Wax with 50% of BIO Thinner. Depending on wear and tear, apply a new thin coat of wax every 4 to 6 months. Provide adequate ventilation during application and drying.

MAINTENANCE After 4 weeks, when the wax is fully cured, the surface may be treated with undiluted self- polishing BIO Timber Care Polish. Apply thinly and evenly with an absorbent lint free cloth. For regular cleaning wipe treated surfaces with a cloth moistened with Bio Natural Cleaning Emulsion diluted at the rate of 50 ml in 5 Litres of warm water. Make sure that no moisture is allowed to remain on the waxed surface because it will cause staining.

INGREDIENTS Beeswax, carnaubawax, earth/or paraffin wax, shellac wax, lemon peel oil, paraffin oils.

CLEANING Use BIO Thinner.

COVERAGE 1 Litre covers approx. 20-50 sqm., depending on the absorbency of the wood, its surface conditions and the application method. On floor boards: Softwood 20 ml per sqm = approx. 50 sqm per Litre Hardwood 6-10 ml per sqm. = approx. 100 - 160 sqm

PACKAGING BIO Antique Wax 175 ml, 1 Litre and 4 Litres BIO Hard Floor Wax 25o ml , 1 and 4 Litres.

PRECAUTION Keep away from open flame and out of the reach of children. Please dispose used rags in a sealed metal container. Can spontaneously combust.

STORAGE Keep tightly sealed in a cool and dry place

DISPOSAL: Do not pour left over wax down the drain. Unwanted wax should be brushed out on newspaper, allowed to dry and then disposed of via domestic waste collection. Let empty container dry out as well and dispose via recycling program.

The preceding information is given as a general guide only. Some variations may occur or be advisable for particular conditions. Our responsibility for claims arising from breach of warranty, negligence or otherwise is limited to the purchase price of the material.. BIO ANTIQUE WAX and BIO HARD FLOOR WAX are environmentally friendly products. 1/05/2011