Email Us : bioproducts@bigpond.com

Brochure of BIO PRODUCTS Australia PTY LTD

BIO Enamel Lacquer exterior oil based

BIO ENAMEL LACQUER
EXTERIOR, OIL BASED

DESCRIPTION


A traditional oil based enamel paint which makes it dirt-and water-repellent
in a semi gloss or matt painted finish, containing no toxic solvents, resins or heavy
metals. Made from natural renewable materials like plant oils, resins and pigments.
It is gentle to the climate and resourcesSuitable for all wood types, steel, aluminium and copper. Especially suitable for use on toys, panelling, skirting and architraves, garage doors and
window frames.

PREPARATION

Prepare the surface in accordance Australian Standard 2311 Painting of Buildings. Surfaces should be well sanded, dry and cleaned of greasy, waxy and dirty contaminants using BIO Thinner. Do not apply coatings to unseasoned or wet timber. Round off sharp edges. It is also good practice to prime back surfaces. Hardwoods and other timbers rich in natural oils, waxes, acids and terpenes should be degreased using Bio Thinner because these substances may mix with the paint and prolong its drying time. Imperfect coats may require complete stripping before applying Bio products. Timber moisture content must be under 15% for softwood, and under 12% for hardwood. Do not apply over acrylic, PU or epoxy based coatings.

METAL PRIMING

Provides anti-corrosive protection for steel, aluminium, brass and copper. Not effective on zinc and galvanized surfaces. The metal should be cleaned of all grease, dirt, processing soil, salt residues, weld scale, rust and other residue which is likely to affect the performance of a protective coating. Apply 1-2 coats of Metal Primer thinly and evenly. Lightly sand between coats when completely dry. Finish with Bio Enamel Lacquer white or coloured.

APPLICATION

Stir thoroughly before use with a broad flat stirrer. First apply one coat of BIO Enamel Lacquer Undercoat water based on new or imperfect surfaces followed by two coats of topcoat. Thinning of BIO Enamel Lacquer Undercoat with water only and topcoat as desired with 5-10% BIO Thinner to obtain a smooth flowing consistency. Minimum wet film thickness for each coat must be 100 microns. Maintain a wet edge when painting.

DRYING

Apply second and subsequent coats only after previous coat has thoroughly dried. This will take between 24 and 40 hours, and longer with cold or damp weather. Do not be tempted to apply paint too thickly, as this retards the drying process. Lightly sand if necessary. Do not use below +12C and above 80% humidity, in cold damp conditions, when condensation, rain, dew or frost are likely to occur or hot days, direct sunlight or hot surfaces. Provide adequate ventilation during application and drying. Reaches maximum durability after 8-14 days.

COLOURS

Bio Enamel Lacquer is supplied in white. Standard full colours are:
 

Green,  Blue,  Ochre,  Yellow,  Brown,  Red &  Black
 

All colours can be used as tints. The customer tints to his/her own satisfaction. All colours are intermixable.  Note: slight variations between lots are possible

INGREDIENTS

Based on Castor oil, soya bean oil, safflower oil, pine resin, lemon peel oil, paraffin oil, lecithin, bentone, ethanol, lead free drying agent, aluminium silicate, feldspar, iron oxide, metal and mineral pigments. Free of cadmium, chromates and lead.

CLEANING Use BIO Thinner.
COVERAGE 1 Litre covers 8 – 10 sqm. Depending on the absorbency of the substrate.
PACKAGING White : 250 ml, 1 and 4 Litres
Colours 250 ml, 1 and 4 Litres

PRECAUTION

Keep away from open flames and out of the reach of children. Please dispose used rags in a sealed metal container. Can spontaneously combust.
There is no manufacturer’s liability for applying this product onto non compatible paint systems like acrylics, polyurethane, epoxy finishes etc.

PAINT DISPOSAL:

Do not pour left over paint down the drain. Unwanted paint should be brushed out on newspaper, allowed to dry and then disposed of via domestic waste collection. Let empty container dry out as well and dispose via recycling program.

STORAGE

Keep tightly sealed in a cool and dry place. Surface skin may develop in opened cans.

The preceding information is given as a general guide only. Some variations may occur or be advisable for particular conditions. Our responsibility for claims arising from breach of warranty, negligence or otherwise is limited to the purchase price of the material.


BIO ENAMEL LACQUER is an environmentally friendly product. 1/05/2011