Email Us :

Call Us : 1800 809 448 OR +61 8 8391 2499


BIO Wood Protecting Borax

A proven and reliable transparent preservative prepared from Borax which can be used for interior or exterior applications. A natural product and known for centuries.  It seeps quickly into the wood, protecting against fungi, termites and insects. It may be used to prime all types of wood surfaces, even timber with a moisture content above 20% or wood in contact with the ground. After treatment, wood becomes slightly brown in colour.

Note: this product does not currently comply with the Australian Standard 2057 " Soil Treatment for Buildings UNDER CONSTRUCTION FOR PROTECTION AGAINST Subterranean Termites " The following test reports have been published CSIRO Australia 1958 - Susceptibility of Termites to boric acid and New Zealand Forest Service - Toxicities of some waterborne wood preservatives to wood-destroying fungi. It has been approved by the Institute of Building Technology in Berlin as effective against fungi and insects.

Wood surfaces must be dry and cleaned of oily and greasy contaminants using BIO Thinner. Previous coatings must be removed

Building frameworks, ceilings, log cabins, bee hives, stalls, barns, windows, fence posts, garden furniture, railings, sand boxes etc.

Mix 150 grams Borax with one litre warm water (40C). Brush, dip or spray evenly, working it well into the grain. Large or pest infested pieces should be dipped or sprayed. Visible surfaces should be painted with a brush. The second coat can be applied after 24 hours drying time. Exposed timber which is in contact with the ground must be sealed off with a paint or varnish, to prevent rain leaching out the salt. For posts, beams and poles prepare a solution in a drum or trench and soak the timber for 24 hours.
For proper protection use the following quantities:
Timber thickness less than 40 mm = 300 ml solution p.sqm.
Timber thickness more than 40 mm = 350 ml solution p.sqm.
For small holes from borers a 15% solution may be injected into the holes using a syringe

Treated timber may be painted when completely dry. Before painting wash off the surplus of Borax on the surface, otherwise surface residue may inhibit paint adhesion or discolour the paint.
Borax concentrate - dissolves in up to 15% in water

Use water

1 Litre covers 7-10 sqm., depending on the absorbency of the timber

1 kg, 1o kgs and 25 kgs

Keep away from children. All types of exposure are considered to be practically non-harmful. The main effect of exposure is irritation due to the mildly corrosive nature of borate dusts and solutions.

Skin: Contact with skin may result in mild irritation. Wash contaminated skin with plenty of soap and water.
Eyes: Contamination may result in mild irritation. Irrigate with copious quantities of water for 15 minutes.
Inhalation: Remove victim from exposure.
Ingestion: Thoroughly rinse mouth with water. Give plenty of water to drink and induce vomiting.
Seek medical advice if effects persist

Keep tightly sealed in a cool and dry place
At all times should be stored away from foodstuffs.
Not defined as a dangerous good by the Australian Code for the Transport of Dangerous Goods by Road and Rail. The product is a scheduled poison (S5) and must therefore be stored, maintained and used in accordance with the relevant State Poisons Act.
At all times should be stored away from foodstuffs.

DISPOSAL: Do not pour left over borax down the drain. Unwanted borax should be brushed out on newspaper, allowed to dry and then disposed of via domestic waste collection. Let empty container dry out as well and dispose via recycling program.

The preceding information is given as a general guide only. Some variations may occur or be advisable for particular conditions. Our responsibility for claims arising from breach of warranty, negligence or otherwise is limited to the purchase price of the material.

BIO Wood Protecting Borax is an environmental friendly product.